Pet forum for dogs cats and humans - Pets.ca

Pet forum for dogs cats and humans - Pets.ca (http://www.pets.ca/forum/index.php)
-   Free Stuff is Good Stuff - Pets.ca's freecycling forum (http://www.pets.ca/forum/forumdisplay.php?f=77)
-   -   Xl kong metal floor wanted (http://www.pets.ca/forum/showthread.php?t=81606)

Terrie July 14th, 2012 08:58 PM

Xl kong metal floor wanted
 
I have an XL Kong crate and twice my pup ripped apart the plastic flooring like a gig saw puzzle. I`ve written to Kong the manufacture and they informed me that Pet Smart are the distributors for this item, I need to contact them, well I have and they graciously replaced the floor twice but, the third time, they informed me I would have to pay for it, price of the crate. So..... I know in the past i had an XL crate that had a metal floor, but unfortunately, i threw it out due to grieving. Now I am looking for another metal floor size 29 x 47 an a half inch rolled edges around it ( so that the dog cant cut himself ) . - Reasonable price will be paid, including shipping in the Windsor Ontario region.

Thank you :pray:

pbpatti July 15th, 2012 09:55 AM

I do not have a floor for you but I did have a thought :lightbulb::lightbulb:. If you have a metal shop in your area you can go and see if they will have a peice of metal or something similar that can fit the floor of your crate. Good luck.

Longblades July 15th, 2012 10:38 AM

If the crate itself is 48" x 30" you should be able to order a metal pan from several sources. But, if your pup is ripping up a plastic pan I bet he will continue to try with a metal pan and the sound of toenails scratching on metal will drive you nuts.

What about cow stall matting? It's thick, durable, will scratch but not right through for a long time, and his scratching on it will be quieter. A TSC or Co-op might be able to help you. You need to have it cut very, very snug so pup can't get a corner up.

Like this: [url]http://www.tractorsupply.com/rubber-horse-stall-mat-4-ft-x-6-ft--2219003[/url]

Terrie July 15th, 2012 12:55 PM

Thank you, there is a TSC store near by. I have
A wooden plank and he's chewing on it, I don't
Need to have splinters in his mouth. I have called
A few tool and die shops for I guess you say
Sheet metal but they don't provide that service.
Hopefully he's going to grow out of this stage soon.
Thank you for your help !


All times are GMT -5. The time now is 05:39 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2013 Pets.ca. All Rights Reserved.